Tips For Replacing a Window Handle
It is easy to change your window handle in the convenience of your own home. Follow these steps to ensure a smooth and beautiful finish.
Start by removing the screws to expose the screws within your uPVC window handle. Measure the spindle's length to ensure you get the right size replacement.
1. Determine the length of the Spindle.
When you're replacing a window handle it's important to determine the dimensions of the spindle right. This is because it could affect how tight or loose the handle is, and whether it locks correctly in the frame of the window. The spindle is a metallic shaft that connects the handle to the lock in the frame of the window. The spindle can be either an industry standard cross-section of 8mm or the earlier 9mm versions. The current industry standard is 8mm but this was not always the case so when buying a new handle it is important to check the measurements.
Remove the handle. This is done by turning the handle in the open position and unwinding two screws that hold the handle in place (which are usually concealed behind plastic caps that are required to be removed). After removing the handle, you can measure from the base of the handle to the end of the spindle. This will give you the measurement required to buy a replacement.
There are many options when you're looking to select a new window handle. From sleek chrome that can fit into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more classic Tudor Cottages with curled mongoose tail latches. The options are endless but the most important thing is to choose a style that complements your home.
Espag handles are usually fitted to uPVC windows and are the same size with 43mm centers (2 fixings). Cockspur handles range from 58mm to 62mm but there are replacements for both sizes. Window handles made of Cadenza are different in size because they feature an angled blade that functions an interlocking mechanism that is multi-point inside the window.
When you are choosing a handle for your window it is important to consider the hand you use to open your door. Inline window handles aren't handed and can be used for left or right handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out is a frustrating experience, regardless of regardless of whether the handle is damaged or worn out. The good news is that you can fix the uPVC handle by yourself. All you need are the most basic tools and some time to complete the job.
First, you must open the window and make sure that it is in the unlocked position. Then, remove the screw caps that hold the handle in place. Once the screw caps are removed then you'll be able remove the handle.
The handle itself is fixed to a spindle in the window frame. Depending on the type the handle is held in place either with a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both kinds of handles can be found on casement windows, including aluminium ones. They can be locked using a key to prevent unauthorised opening of the window from outside or you can lock them by turning the handle clockwise.
To remove the handle, you will need a flat-bladed screwdriver. When this clip is released the handle will fall off the spindle. After the handle has been removed, you will be required to measure the length of the spindle to ensure that your new handle is compatible with this size.
Once you have decided on the correct size for the handle, screw it in the correct position. You will need to ensure that the new handle is firmly secured and that it is turning the correct way (clockwise for open and counterclockwise for closed). upvc door handles is essential to make sure that the handle hasn't been installed upside down.
Replace the cap screws. After you've done this, you can test the handle to ensure that it is working properly. You should also test the locking mechanism by moving the handle until it is locked position, and then back to the locked position.
3. Take off the Screws
A uPVC window handle is an essential element of any home and is usually the first thing to begin to show signs of wear and wear or damage. This could be due natural elements, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple replacement is a simple solution and stop the problem from recurring.
uPVC handles may also be difficult to remove when the locking mechanisms are not functioning properly. It is often possible to fix the issue by replacing the multipoint locking mechanism instead of the entire handle. This can save you money.
After you've removed the old handle, you'll need to remove the screws that were fixing it to the base. These are typically located on the inside of the base of the handle. You may require an screwdriver to do this, and it's crucial that you don't over tighten, as this could cause the handle to become loose.
Then, you'll need to locate the screws or pins that secure the handle. These are likely to be located on the inside of the handle base and you will need to use an screwdriver or a pair of pliers to take them off them. If you'd like to replace them, you can do so by replacing the screw caps and check the handle to ensure it functions correctly.
If you're ready to put in the new handle, simply line up the spindle with the cut-out in the window mechanism and screw in place. If you want to replace the screws make sure that the handle is in a position that is open and that the screws are securely secured. Then you can enjoy the newly installed window handle. I hope this will enable you avoid having to pay for costly window and door replacement services in the future. If you'd like more help regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be completed within just a few steps. The first step is to determine the kind of handle, determine its spindle and know what tools you'll require to complete the task. Always prioritise the safety of your windows and tools. It's also important to take your time and follow the steps carefully to ensure that you have a functional handle that is safe to use.
The first step is to identify the screws that hold your current window handle and remove them, while keeping a safe hold on the handle itself to prevent it from crashing and causing injury. Once the screws have been removed they can be repositioned in a safe place to be replaced in the future.
After removing the old handle, you can begin to install your new one. It is important that the handle fits perfectly so that it functions correctly and locks the window in position. The next step is to slide the metal square to the back of the handle into the hole of the window mechanism, ensuring that it is secure.
Now that your new handle is in place, the last step is to replace the caps on the screws and test it to make sure it functions. If you aren't satisfied with the results, or the window doesn't shut or open properly Contact our experts for assistance.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with some DIY knowledge can complete the task. It is important that the handle you use matches the size and style of your window. Contact us if aren't sure of the kind of handle you need. They will be able assist you with all of the possibilities.